There are many ways to prevent grinding burns of rolling bearing sleeves. Here are some suggestions:

1. Choose a suitable grinding wheel: Choose a grinding wheel with moderate hardness and organization number to reduce the friction heat between the grinding wheel and the workpiece. Avoid grinding wheels that are too hard to avoid generating too much heat during grinding.

2. Control grinding parameters: Reasonably control grinding thickness, workpiece speed and feed rate. Reducing grinding thickness can reduce metal plastic deformation and internal friction, and reduce the generation of friction heat. Increasing workpiece speed can shorten the time for the workpiece grinding surface to pass through the grinding area and reduce the accumulation of friction heat. For materials with high grinding strength, high hardness and poor thermal conductivity, a smaller feed rate should be used to improve grinding efficiency and avoid burns.

3. Check and maintain equipment: Regularly check equipment components such as grinding wheel shafts, worktable disks, reciprocating travel switches, etc. to ensure that they are operating normally. For example, pre-tighten the grinding wheel shaft bearings or replace bearings, overhaul various components of magnetic reducers such as turbines, worms, etc., and replace wear parts. These measures can reduce grinding burns caused by equipment failures.

4. Optimize the grinding process: Select the appropriate grinding process according to the material and processing requirements of the workpiece. For example, use appropriate coolant and cooling method to reduce the grinding temperature. At the same time, keep the coolant clean and replace it regularly to ensure its cooling effect.

5. Control environmental factors: Keep the ambient temperature of the grinding area stable to avoid excessively high or low temperatures from having adverse effects on the grinding process. At the same time, reduce dust and impurities in the environment to prevent them from entering the grinding area and affecting the grinding quality.

6. Train operators: Ensure that operators have correct operating skills and safety awareness. They should understand the various risks and preventive measures in the grinding process and operate in strict accordance with the operating procedures.

Through the implementation of the above measures, the occurrence of grinding burns of rolling bearing sleeves can be effectively prevented, and product quality and production efficiency can be improved.